How do I reset my Whirlpool front load dryer? If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.

How do I reset the control panel on my Whirlpool Duet dryer? Resetting your Whirlpool Duet Dryer is very easy. All you have to do is turn it off and unplug it. Keep the dryer unplugged for at least one minute, plug it back in, then switch it on to finish the process.

Where is the dryer reset button? Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes.

Why is my dryer running but not heating? Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element. If you gather your tools and follow this guide, you may be able to solve basic dryer heating problems on your own.

How do I reset my Whirlpool front load dryer? – Related Questions

When I press the start button on my dryer nothing happens?

If your dryer won’t start when you push the start button, the most likely causes are a lack of power, a defective door switch, a blown thermal fuse or a bad start switch. If it doesn’t turn on, it’s likely that the dryer has no power. Check your power cord and the house circuit breaker.

Is there a reset button on a Whirlpool?

The downside to Whirlpool appliances is that they don’t have a reset button. But some of them do have certain error codes. You can identify them from the user manual. If you can’t identify the error code, let’s start with the most basic step.

Why is my Whirlpool dryer not coming on?

Sometimes a Whirlpool dryer not starting is more of a power issue than a dryer malfunction. Make sure the dryer is correctly plugged into the proper electrical outlet. Check for tripped breakers or blown fuses. If needed, reset any tripped breakers and replace blown fuses.

How do you know if your dryer thermal fuse is bad?

Touch the black lead to one of the fuse’s terminals and the red lead to the other terminal. If the meter display shows zero Ohms of resistance, the fuse has electrical continuity and has not blown, indicating that another component in the dryer is likely defective and preventing the appliance from running or heating.

How do I fix the control lock on my Whirlpool Duet dryer?

Press and hold the “Control Lock” button for at least three seconds to unlock the control panel. Once unlocked, you have full access to the dryer controls.

Do all tumble dryers have a reset button?

Not all tumble dryers have re-set buttons, so if it stops heating it is most likely to be because the thermostat or TOC (Thermal Overload Cutout) has tripped due to overheating. Thermostat’s are usually the size of a 5p and can be accessed by removing the back panel.

What do you do when your dryer won’t start?

Unplug the dryer and check the thermal fuse for continuity. Replace the thermal fuse if the multimeter measures no continuity. Check the exhaust vent because a clog in the vent likely caused the thermal fuse to blow. For dryers with a dial timer, a broken push-to-start switch can prevent the motor from running.

Why is the dryer blowing cold air?

One of the most common reasons your tumble dryer decides to blow out cold air instead of hot is, rather ironically, because it has overheated. If your tumble dryer does not have a reset button it is likely you will need to replace your thermostat and thermal overload cut-out (TOC).

Why did my dryer suddenly stop working?

Heat and controlling heat are essential to the dryer’s function. A faulty or broken thermostat can make a dryer stop working. Replacing the fuse or the thermostat will allow the dryer to work again. A blown thermal fuse from overheating indicates an additional problem, such as improper ventilation.

How do you clear a whirlpool error code?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

Is there a fuse on a Whirlpool dryer?

Remove the back access panel on the dryer, and look for the exhaust duct near the bottom of the unit. The thermal fuse is either circular or oblong, often white plastic with black material in the center and two wire leads. The thermal fuse is mounted on the exhaust duct.

How do you tell if a thermal fuse is blown without a multimeter?

Testing By Bypassing The Fuse

If you do not have a multimeter, you can also test whether or not the fuse is working by bypassing the fuse itself. Simply detach the wires from the fuse, wire them together using a jumper wire and attempt to operate the dryer.

Will dryer run with bad thermal fuse?

Many dryers simply will not run once a thermal fuse triggers. On other models, the drum continues to turn and the dryer operates, but the heating element does not. Clothes come out of the dryer wet once the appliance completes its drying cycle.

How do you unlock the controls on a Whirlpool dryer?

Press and hold the Control Lock Key for 3 seconds to unlock the machine. You will notice the machine count down from 3-2-1. The control lock may be a stand alone key, or it could be a dual function key paired with another button like Extra Rinse, Steam, etc.

How do I turn off the control lock on my dryer?

To lock and unlock the dryer controls: Press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked.

How do I turn off the control lock on my Whirlpool dryer?

To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.

Where is the error code on a Whirlpool Duet dryer?

Unplug the dryer for 5 minutes and then plug it in. If the code returns, replace the main electronic control board. A button is stuck on the keypad on one of the two user interface control assemblies in the console. If you can’t free the button, replace the user interface control assembly with the stuck button.

Why did my Whirlpool Duet dryer stop working?

Ensure the breaker controlling the dryer is flipped “on” or that the fuse isn’t blown. If the breaker was off, turn it on, or replace the blown fuse. This should resolve the issue and allow your dryer to operate as usual.

What does a dryer control board do?

A dryer’s electronic control board manages the dryer’s operations, including drying time and temperature.

Why is my tumble dryer drum not going round?

A broken drive belt is the most common reason a dryer won’t spin. To fix this issue, turn the drum by hand. A working belt should provide some resistance, so if the drum turns very easily and loosely, the belt is probably broken.

Can I fix my dryer myself?

Here’s the first thing to know about dryer repair: You can solve most dryer troubles yourself. There’s no need to find a technician, schedule a service call or pay hundreds dollars for dryer repair. Tip: The first step in any appliance repair is to make sure it’s getting electricity.

Source link

Categorized in: